Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand Product Review

Our recommendation for Bosch 4100-09 10-Inch Worksite Table Saw based on actual consumer reviews:

*****Highly Recommended*****

Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand is one of the table saws we have reviewed with its accuracy and ease of operation. We are pleased to provide our “highly recommended” approved seal. Your cash is going to be wisely spent in this particular table saw as well as will probably end up being valuable every single dollar if you choose to purchase this particular table saw. The evidence to this fact is you won’t come across numerous issues on this particular model since many are extremely pleased as well as contended with regards to their purchase.

The Bosch 4100 Table saw provides major additional features as well as improvements which make 4100-series essentially the most specific, long lasting and high-performing table saw in the classification. It has a squarelock rip fence engineered for maximum trueness. In addition to that, it has a gravity rise stand and a durable sub-base that increases tool life by handling job site abuse. It has also integrated carry handles that increase portability and single point bevel movement for consistent accuracy.

Our Full Review of Bosch 4100-09 10-Inch Worksite Table Saw

The Bosch 4100-09 table saw is simply the Bosch 4100 table saw packaged with the Gravity Rise stand. The Bosch 4100-09 table saw is just the Bosch 4100 table saw packaged together with the Gravity Rise stand. The difficulty with a lot of portable table saws is that a good table saw requires a bit of weight and volume to keep its ground. When you get a table saw which is too light-weight, you could observe it jumping around a bit or perhaps moving/sliding when it’s under pressure or utilized in high-torque circumstances.

The Bosch 4100-09 has really good weight as well as a good stand, it keeps its ground. The saw and the stand have a weight of 99 pounds. The saw is about 60 pounds and the stand is 39 pounds.

Quick Info and Product Highlights

  • Squarelock rip fence engineered for maximum trueness
  • Includes the new enhanced award-winning gravity rise stand by Bosch
  • Durable Sub-Base increases tool life by handling job-site abuse
  • Integrated carry handles increase portability
  • Single point bevel movement for consistent accuracy

Product Features

Ease of Setup
You need to have a flat screwdriver, a combination square, Phillips screwdriver, and a 10mm wrench. As soon as you open the package, you find the table saw, the table insert, the rip fence, the anti-kickback device, the barrier guard assembly, miter gauge and the push stick. The manual guide present exactly on how to setup and tune all of the pieces. The setup is so simple and it can be put together very quickly.

Mounting the Saw
The four mounting corners of Bosch 4100-09 10-Inch Worksite Table Saw has the ability to mount and fasten the saw to either a workbench or a stand to increase stability and safety.

Gravity Rise Stand
The advanced design of the Gravity Rise Stand of Bosch 4100 Worksite Table Saw makes it easy to handle and movable. The gravity rise stand can be folded into an upright position and back down again.

Roll Up Wheel Stand
The wheel stand of Bosch 4100-09 enables you to push the table saw out of your garage easily. You can easily roll it up to back of your truck. You can slide it up and take it anywhere. Having the capacity to roll a saw all around similar to this creates a lot less stress in comparison with needing to dead-lift a saw through a workbench along with transporting it with a pair of hands. Being an individual who has experienced back problems often, I’m able to see the benefits here.

The wheels are 8-inch treaded pneumatic wheels. This provides you the capability to roll this around effortlessly on harder terrain and it glides alone really easily on flat surfaces.

Large Cutting Table and Squarelock Rip Fence
The table on the 4100-09 is smooth and accurate. The table is 29” wide and 29 ½” deep, and made from machined aluminum. This table can also extend and it offers a total ripping capacity of 25” wide. This large cutting ability indicates that you’ll be able to produce a great deal of cuts which you normally may think that you’d require a larger shop saw for.

One of the good features of this table saw is the cutting table has built-in extension capabilities. It will slide smoothly when you adjust it. It has also a lock handle that enables you to lock the table extension in its place. As a safety precaution, if the extension is not locked.

The squarelock rip fence is designed for maximum trueness, so that you can get a maximum accuracy of every cut. The modern rip fence slides throughout the cutting table effortlessly for easy one-handed operation, and it locks constantly in place to make constant exact cuts. The rip fence is on the left side of the table saw under the cutting table, near the additional blade storage area. This provides you a hassle-free area to store the rip fence whenever not use as well as guarantees that you won’t place it out of the way and forget it somewhere when not in use.

Smart Guard System for Added Protection and Visibility
The modular three-piece system includes a built-in riving knife, blade guard and anti-kickback pawls, all which install within seconds and require no tools. The 4100-09 has a good carbide-tipped saw blade right out of the package. When you are an occasional table saw user you may benefit from upgrading the blade instantly, however this is a nice blade. The riving knife is part of the modular Smart Guard system and the other two parts of this system are the main barrier guard and the anti-kickback pawls.

The barrier guard covers the blade its main objective is to guard both hands as well as other things from coming into unnecessary contact with the blade. The anti-kickback pawls drag over the top of the materials as they pass through the saw blade and are intended to claw into and handle anything that gets kicked backwards.

Because these two pieces can certainly simply be removed from the saw when needed, Bosch has presented an easy place underneath the right side table extension to store them when not in use.

When most of these parts have been in place, this saw is really safe and will help to prevent you from in contact with the blade and will prevent any kickback situations from injuring the operator.

The Warranty

Bosch has a warranty plan that will cover you in the first year if anything is not working correctly with your saw. There is a one year limited warranty, a 30 day money back guarantee and a one year service plan. The one year limited warranty covers and defects or issues with workmanship.

Customer Reviews

Average Amazon Rating: 4.5

To date, there are 93 customer reviews about Bosch 4100-09 10-Inch Worksite Table Saw on Amazon. Most of the reviews says that Bosch 4100-09 10-Inch Worksite Table Saw is great and they appreciate the convenience the table saw offers to have a great cuts.

Pros

Easy transport, versatile, and portable
Simple setup and has a gravity rise stand
The rip fence is accurate and sturdy.
Great for storage because of collapsible design
Great table for portable and fixed use.
Movable parts and blade adjustment
Great number of accessories which are making Bosch 4100-09 very safe, efficient and reliable.
Everything moves smoothly and even with the hard working condition this saw keeps the alignment pretty well and cuts the material precisely.
Even being portable, there is enough power for Bosch 4100-09 to cut tougher materials.

Cons

Several negative reviews that the included blade is of mediocre quality.
Clumsy blade bevel adjustment.
A lot of complaints about the saw that dulled out so quickly.
Dust collection system doesn’t perform as expected.
Quite expensive portable saw
Several complaints that the fence doesn’t stay parallel to the miter slots and blade over time.

Click Here to Leave a Comment Below

Leave a Comment: